A list of the contents of this article:
How is mineral water made?
The manufacture of mineral water: raw water-quartz sand filtration-activated carbon filtration-precision filter filtration-explosion gas-de-CO2-- ultrafiltration (or nanofiltration)-ozone mixing-finished product filling.
Production technology of drinking natural mineral water and bottled drinking water. Maintenance and disinfection of water sources, pipes and equipment, cleaning and disinfection of bottles and their lids, control of sterilization facilities and monitoring of germicidal efficacy. Control of deionized purification equipment and monitoring of purification degree in pure water production, and control of environmental hygiene and cleanliness in cover cleaning and disinfection workshop and filling workshop.
Mineral water is formed by circulation in the deep strata and contains minerals and limited indexes stipulated in the national standard. According to the physical condition and the difference of drinking water in different regions, choosing suitable mineral water for drinking can supplement minerals, especially trace elements.
Mineral water is not made, but formed naturally. Mineral water taken from below 120 meters underground is not polluted. Mineral water, which meets the national mineral water standards, is rich in mineral elements and trace elements, which is very good for the body.
What is mineral water made of?
The manufacture of mineral water: raw water-quartz sand filtration-activated carbon filtration-precision filter filtration-explosion gas-de-CO2-- ultrafiltration (or nanofiltration)-ozone mixing-finished product filling.
Mineral water is formed by circulation in the deep strata and contains minerals and limited indexes stipulated in the national standard. According to the physical condition and the difference of drinking water in different regions, choosing suitable mineral water for drinking can supplement minerals, especially trace elements.
As for the practice of mineral water: the general water sources are made from tap water, but they all have to go through the deepening treatment of manufacturers, that is, after sand, carbon, ion exchange, disinfection, and finally adding mineralizers and bottling. After the depth of the mineral water quality has been very good, the taste is also good. Therefore, even if the source of mineral water is tap water, after strict treatment process, consumers do not have to worry about its quality.
Natural products contain a variety of minerals as far as composition is concerned, natural mineral water contains a variety of minerals, including carbonate, magnesium sulfate, potassium sulfate and sodium sulfate. Some also contain natural carbon dioxide and hydrogen sulfide and other gases. Man-made mineral water is mostly distilled water or filtered tap water with some salt or carbon dioxide gas added.
Drinking pure water is based on water that meets the hygienic standard of drinking water, through electrodialysis, ion exchange, distillation and other processes, most of the harmful, toxic and odorous substances such as heavy metals, trihalomethanes, organic substances, radioactive substances and microorganisms in the water are removed, so as to eliminate the direct and potential harm to human health, sealed in barreled containers and water that does not contain any additives to drink directly.
How to produce mineral water
1. Sterilization: sterilization of water to eliminate possible harmful microorganisms. Filling and sealing: fill the treated water into the bottle and seal it to ensure a sterile environment. Light inspection: use light inspection equipment to check whether the bottled water is foreign or contaminated. Finished product: the mineral water after the completion of all the above steps will become the finished product.
2. The production process of mineral water includes: source water → crude filtration → fine filtration → deion purification (ion exchange, reverse osmosis, distillation) → sterilization, → filling, capping, → lamp inspection, cleaning and disinfection of → finished → bottles (buckets) and their lids. What kind of bottling process equipment does mineral water production equipment have: water treatment equipment, bottle blowing machine, filling machine, light inspection equipment, water blowing machine, labeling machine / set labeling machine / hot melt adhesive, inkjet machine, film wrapping machine, packing machine.
3. Source water collection: select underground or surface water sources and ensure that the water quality meets the requirements of mineral water. Natural water sources are generally chosen, such as mountain springs, lakes or groundwater. Purification treatment: after preliminary filtration and removal of suspended solids, sediments and other impurities. The commonly used purification methods include precipitation, filtration, activated carbon adsorption and so on. Sterilization: use physical or chemical methods to kill microorganisms and bacteria in water.
4. The production technology of drinking natural mineral water and bottled drinking water. Maintenance and disinfection of water sources, pipes and equipment, cleaning and disinfection of bottles and their lids, control of sterilization facilities and monitoring of germicidal efficacy. Control of deionized purification equipment and monitoring of purification degree in pure water production, and control of environmental hygiene and cleanliness in cover cleaning and disinfection workshop and filling workshop.
Raw water, raw water pump, multi-media filter, activated carbon filter, precision filter, ultraviolet disinfector, reverse osmosis water treatment equipment. This is a conventional system, and engineers will accurately design the whole system according to the local raw water quality report. Mineral water filling system: mineral water through three-in-one filling machine, in a machine to achieve automatic bottle washing, filling, sealing function. PLC control of all systems in the mineral water production process.
6. first, the spring or groundwater is roughly filtered, then fine filtered by a filtration machine, then sterilized, then filled and covered with water, the next step is light inspection, and the final inspection is the finished mineral water. Mineral water is a kind of drinking water containing minerals, trace elements or other substances, which takes the water from underground mineral springs as raw materials.