A list of the contents of this article:

How to cultivate the ornamental value of Oncidium?

The main results are as follows: 1. Oncidium has higher requirements for water, and the drying degree of the medium is taken as the standard when watering. In the season of exuberant growth, it is best to water once in the morning and evening every day; reducing moisture in winter is conducive to flowering. The pot-changing operation of Oncidium is usually carried out after the flowering period of the orchid plant, and the pot can be changed every 2-3 years. The ramet is the main method of propagation of Oncidium, and the best time of ramet is after flowering.

2. First of all, it is very important to choose the right soil. Oncidium prefers a well-drained and slightly dry environment. Broken bricks or rubble can be placed at the bottom of the basin to increase air permeability. The mixture of 4 parts of broken fern root, 1 part of peat soil, 2 parts of broken charcoal, 2 parts of vermiculite and 1 part of water moss is recommended. In terms of light, Oncidium needs sufficient sunlight to promote flowering, direct sunlight in winter, and proper shade in other seasons to avoid sunburn.

3. Oncidium culture method soil Oncidium has relatively high requirements for soil, which requires air permeability and drainage, and has a certain moisturizing ability. generally, Oncidium culture uses charcoal and water moss as the culture substrate. at the same time, some broken bricks are added to the bottom of the basin to increase the drainage capacity. Oncidium is also very sensitive to light.

4. Pot soil and basin change because Oncidium likes a dry environment, it is appropriate to use a medium with good drainage and ventilation, so snake sawdust is the best choice, and it is best to add a little water moss with water retention to make the plant grow well. Ramet is the main method of reproduction, and the best time for ramet propagation is after flowering, so when ramet is needed, it can be carried out at the same time as changing pots.

5. Lighting: Oncidium likes bright scattered light, but can not be directly exposed to strong sunlight. Choose a bright window location in the room to place Oncidium. Temperature: Oncidium requires moderate temperature, and the most suitable growth temperature is 15-25 degrees Celsius. Avoid exposure to cold or overheated environment. Moisture: keep Oncidium's soil moist, but don't overwater it, otherwise it will easily lead to root rot.

6. the growth habit of Oncidium prefers humid and semi-shady environment. In addition to daily watering to maintain substrate humidity, spraying foliar and surface water is particularly important for maintaining air humidity and promoting the growth of leaves and flower stems. Hard-leaf varieties are relatively resistant to drought and will not dry to death even if they are not watered for a long time in winter. Oncidium culture method temperature Oncidium likes to be warm, and the best growth temperature is 18 to 26 ℃.

How to raise Oncidium

The soil is suitable, Oncidium has higher requirements for soil, and attention should be paid to the use of soil when conservation. It is suggested that peat soil, humus soil and vermiculite should be mixed so that the prepared soil is breathable, soft and rich in humus, which is beneficial to the growth of Oncidium in the later stage. Before going to the pot, it is best to lay a layer of broken tiles or stones at the bottom of the flowerpot to improve air permeability and water permeability. The temperature is suitable, and the temperature conducive to the growth of Oncidium is between 18 and 25 degrees.

Soil: plant ash, vermiculite, peat and humus can be used as cultivation soil during conservation. Before going to the basin, broken tiles or stones are laid at the bottom to increase drainage, and it is best to mix appropriate amount of bone powder as base fertilizer to supplement nutrients. It will grow better in the later stage. Temperature: it likes to grow between 18 and 25 degrees Celsius, if the temperature is too high to maintain ventilation and increase humidity, otherwise it is easy to affect growth.

Provide plenty of light: make sure that Oncidium receives enough sunlight during its flowering. Lack of light will lead to poor plant growth and excessive leaf growth. Place Oncidium in a place with plenty of light so that it can fully carry out photosynthesis. Control watering: during the flowering of Oncidium, watering should be controlled moderately. Wait until the soil surface is dry before watering to meet the moisture needed for its growth.

Change the basin soil regularly every two or three years, replace the old soil with the newly prepared nutrient soil, and trim off the rotten roots and withered branches to ensure that the soil is disinfected before transplanting. Ensuring good ventilation and ventilation is essential to the growth of Oncidium. Ventilation and shading should be done during the growing period, especially in spring and summer, and windows should be often opened for ventilation during indoor maintenance.

How to raise Oncidium and what do you need to pay attention to when maintaining it?

Lighting: Oncidium likes bright scattered light, but can not be directly exposed to strong sunlight. Choose a bright window location in the room to place Oncidium. Temperature: Oncidium requires moderate temperature, and the most suitable growth temperature is 15-25 degrees Celsius. Avoid exposure to cold or overheated environment. Moisture: keep Oncidium's soil moist, but don't overwater it, otherwise it will easily lead to root rot.

Oncidium likes to grow in an environment with sufficient light, but it is not suitable for strong light. During the growth period, the plant can be maintained in a suitable astigmatism environment with 60% to 75% shade in summer and 40% to 50% in spring and autumn. It should be cultivated in the sunny place indoors in winter, and it is best to give sufficient sunlight.

Oncidium needs to use a mixture of water moss, sawdust and orchid stone and put it in a slightly shaded environment. The temperature should be kept within 18-26 ℃ at ordinary times and above 15 ℃ in winter. During its growing period, it needs to be fertilized with flower fertilizer every half month. In addition, it is best to put it in a ventilated place in summer. Cultivation method plant material: it is an epiphytic plant and is not suitable for growing directly in the soil.

Soil and medium: Oncidium prefers a dry environment. Broken tiles and bricks should be laid at the bottom of the basin to facilitate drainage. The culture medium with good drainage should be selected, and it is suggested that broken fern root, peat soil, broken charcoal, vermiculite and perlite should be mixed in a specific proportion. Light management: Oncidium prefers semi-overcast and should accept sufficient direct sunlight in winter to promote flowering. Watering care: the soil should be kept half dry when Oncidium is watered.

Oncidium likes a drier environment and can be watered when I am dry on the surface of the soil. In the growing season, the amount of water can be increased appropriately, and it can be irrigated once in the morning and evening to ensure that there is no stagnant water. Reducing the amount and frequency of watering in winter, water control is beneficial to flowering. Stop watering when the temperature is below 10 ℃ to avoid frostbite. In spring and autumn, organic fertilizer is applied every 20 days to balance all kinds of elements, irrigating roots or spraying leaves. Don't apply fertilizer when the temperature is too low in winter.

Culture methods and matters needing attention of Oncidium

1. Oncidium likes to grow in an environment with high humidity. During the growth period, it is necessary to keep the air humidity at about 60%-80%. Watering is best to keep the basin soil semi-dry and semi-wet. When the growth is exuberant, it should be watered once every morning and evening, mainly with thin water. The temperature is low in winter, and watering should be reduced at this time to facilitate flowering.

2. Ventilation in the process of cultivating Oncidium, it is very important to ensure environmental ventilation. Avoid being too cool and stuffy, and open the window at the right time to maintain good ventilation. In particular, Oncidium in the bedroom needs more windows to promote the healthy growth of plants. Proper sunlight is very important for the growth of Oncidium. Plants should be exposed to sunlight for a period of time every day, but they should be properly shaded in summer.

3. It is necessary to apply sufficient base fertilizer when putting on the basin, usually using rotten bone meal and coconut shell. Apply special flower fertilizer once a month at seedling stage, and supplement appropriate amount of calcium fertilizer. Note: change the basin soil regularly every two or three years, replace the old soil with the newly prepared nutrient soil, and trim off the rotten roots and withered branches to ensure that the soil is disinfected before transplanting.

4. Oncidium is a typical indoor foliage plant, its breeding methods and points for attention are as follows: light: Oncidium likes bright scattered light, but can not be directly exposed to strong sunlight. Choose a bright window location in the room to place Oncidium. Temperature: Oncidium requires moderate temperature, and the most suitable growth temperature is 15-25 degrees Celsius. Avoid exposure to cold or overheated environment.

5. Soil and medium: Oncidium prefers a dry environment, and broken tiles and bricks should be laid at the bottom of the basin to facilitate drainage. The culture medium with good drainage should be selected, and it is suggested that broken fern root, peat soil, broken charcoal, vermiculite and perlite should be mixed in a specific proportion. Light management: Oncidium prefers semi-overcast and should accept sufficient direct sunlight in winter to promote flowering. Watering care: the soil should be kept half dry when Oncidium is watered.

How to cultivate Oncidium (methods and points for attention of Oncidium)

Soil selection of Oncidium requires that the soil is both fertile and loose. When configuring the substrate, you can choose fine fern soil, peat soil, charcoal, vermiculite and broken masonry, with a ratio of about 4 to 1, 2 to 2, 1 to 1. Before planting, a layer of broken tiles should be laid at the bottom of the flowerpot to better drain water and increase soil permeability. Sufficient light conditions contribute to the growth of Oncidium, but it prefers scattered light and taboos direct strong light.

Oncidium culture method with sufficient light, Oncidium likes to grow in an environment with sufficient light, but it is not suitable for strong light. During the growth period, the plant can be maintained in a suitable astigmatism environment, shading 60% to 75% in summer, 40% to 50% in spring and autumn, and indoor cultivation in winter, giving sufficient sunlight to the best.

Oncidium is a typical indoor foliage plant, its breeding methods and points for attention are as follows: light: Oncidium likes bright scattered light, but can not be directly exposed to strong sunlight. Choose a bright window location in the interior to place Oncidium. Temperature: Oncidium requires moderate temperature, and the most suitable growth temperature is 15-25 degrees Celsius. Avoid exposure to cold or overheated environment.

How to raise Oncidium?

Lighting: Oncidium likes bright scattered light, but can not be directly exposed to strong sunlight. Choose a bright window location in the interior to place Oncidium. Temperature: Oncidium requires moderate temperature, and the most suitable growth temperature is 15-25 degrees Celsius. Avoid exposure to cold or overheated environment. Moisture: keep Oncidium's soil moist, but don't overwater it, otherwise it will easily lead to root rot.

When Oncidium is in florescence, it is necessary to provide sufficient sunlight. If there is no light, the plant can not carry out photosynthesis, poor growth and excessive growth of leaves will occur. Oncidium can be maintained in a position with good lighting conditions and be exposed to sunlight.

Provide plenty of light: make sure that Oncidium receives enough sunlight during its flowering. Lack of light will lead to poor plant growth and excessive leaf growth. Place Oncidium in a place with plenty of light so that it can fully carry out photosynthesis. Control watering: during the flowering of Oncidium, watering should be controlled moderately. Wait until the soil surface is dry before watering to meet the moisture needed for its growth.

The soil requires Oncidium to like a relatively dry environment, and lay a layer of broken tiles and bricks at the bottom of the flowerpot before planting. The soil had better choose 4 parts of broken fern root, 1 part of peat soil, 2 parts of broken charcoal, 2 parts of vermiculite and 1 part of water moss. Light and temperature require that Oncidium prefer a semi-shaded environment and can be maintained under full sunshine in winter without shade and can promote plant flowering.

The soil is suitable, Oncidium has higher requirements for soil, and attention should be paid to the use of soil when conservation. It is suggested that peat soil, humus soil and vermiculite should be mixed so that the prepared soil is breathable, soft and rich in humus, which is beneficial to the growth of Oncidium in the later stage. Before going to the pot, it is best to lay a layer of broken tiles or stones at the bottom of the flowerpot to improve air permeability and water permeability. The temperature is suitable, and the temperature conducive to the growth of Oncidium is between 18 and 25 degrees.